Product Description

**0W laser welder latest price

 

Laser deposition welding system (laser mold welding machine), also known as laser welder designed specifically for the mold industry for the repair of precision molds, such as digital products, mobile phones, toys, cars, motorcycles, such as mold making and molding industries. Through patches of mold, you can make full use of the original mold again, a significant reduction in production costs and improve efficiency. This technique can be applied even to modify the design or size of the mold, shorten the product development cycle.
 
 Advantages:
     Heat affected zone is small, does not cause deformation of precision molds. Welding depth, welding firm. Fully melted, leaving no traces of repair. Dissolved material protruding part of the molten pool and the substrate with no dents at the phenomenon, can be repaired cracks, chipping, touching edges and abrasion of sealing edge on hard materials can be welded (~ HRC*0), high accuracy, laser welding spot diameter is only 0.2mm ~ 1.5mm, heat a small area, the workpiece will not be deformed. After soldering can etch do not affect results, oxidation rate, the workpiece will not change color, does not appear after welding pores or trachoma, welding workability, particularly suitable for polishing requirements of the mold repair welding workpieces up to *0 ~ *0 Rockwell hardness.
 The main technical indicators:
     Operating voltage: single-phase **0VAC ± *0% *0HZ
     Laser:
     Maximum average laser output power: **0W
     Single pulse energy: **0J
     Pulse width: 0.5 ~ *0MS
     Laser wavelength: ***4um
     Batter laser welding frequency: 0.5 ~ **0HZ optional
     Spot size adjustable range: 0.**2MM
      Laser Power:
     Maximum power: 8KW
     Pressure protection: ≤ 0.**5MPa
     Cooling water temperature: ≤ *5 ℃ *5 ℃ temperature protection
     Cooling water flow: *0L/min
     Laser welding wire: ∮ 1 ~ ∮ 0.6 Optional
      Observation system:
     Equipped with a dedicated cross cursor magnification microscope systems *0X. Crosshair center aligned with the center of the laser spot (user adjustable). With high-speed electronic filtering device to protect the operator's eyes by laser injury, relieve the operator eye fatigue, improve work efficiency.
     Control System:
     With built-in industrial computer for dual loop precision control. Its stability and ability to run far better than similar products using microcontroller control board.
       Gas protection system:
     Synchronized with internal microcomputer control argon gas protection system, can not be oxidized weld seam stronger and beautiful. Synchronization using the laser emission control, can save the argon. Laser mold welding machine

Working principle is based on high energy and focus point laser welding technology to effectively deal with all small parts welding and repair work, make up the traditional welding repair welding technology in the fine surface deficiencies. Avoid the thermal strain and post-processing the two threshold, significant savings in mold

Main advantages:

Laser mold welding machine for the mold industry tailored introduction of German technology, a unique design, suitable for a variety of large, medium and small patches of mold.

1. The British imported ceramic condenser chamber, corrosion resistance, high temperature, the cavity lifetime (***0), the xenon lamp life 8,**0,**0 times.

2. Laser mold welding machine adopts the world's most advanced automatic shading system, eliminating the time at work on the eyes.

3. Laser head can be rotated **0 degrees, the overall optical path part can rotate **0 ​​degrees, as well as up and down electric lift, front and rear push, particularly suitable for a variety of large, medium and small patches of mold.

4. Parameter adjustment with intelligent remote control, simple operation, and quick.

5. Electric lift table can be three-dimensional movement.

6. Electrically adjustable spot size.
Google Translate for Business:Translator ToolkitWebsite TranslatorGlobal Market Finder